Administrating the Camera
Setting the Camera Image and Audio — Video / Audio Menu Setting the Camera Image — Video Menu
28
Exposure
Adjust the settings of exposure.
Wide dynamic range (View-DR)
Unsupported models: SNC-CX600W/CX600
In high-contrast scenes such as against a back light, this
function reduces overexposure and underexposure.
Select the checkbox to turn on the Wide dynamic range
(View-DR) function.
Wide dynamic range (View-DR) level
Supported models: SNC-VB600/VB600B/VM600/
VM600B/VM601/VM601B/VM602R/EB600/EM600/
EM601/EM602R/EB602R
Using the Wide dynamic range (View-DR) function will
improve visibility of bright and dark parts of an image.
The level of this function is adjustable.
Notes
• To improve visibility of bright and dark parts, the
camera superimposes images taken by fast shutter
speed.
When you select High, the camera takes the image by
superimposing 4 images.
When you select Middle, the camera takes the image
by superimposing 2 images.
When the wide dynamic range (View-DR) is
activating, Middle is automatically activated for
models for which this option is not displayed.
When you select High or Middle, the effect of the
Shutter speed function in the Picture tab of the Video /
Audio menu or Video menu is limited, depending on
the scene.
• When you set Wide dynamic range (View-DR) level
to High, High framerate mode in the Video codec
tab of the Video / Audio menu cannot be set to On.
(SNC-VB600/VM600/VM601/VM602R)
•When Wide dynamic range (View-DR) is selected,
High framerate mode in the Video codec tab of the
Video / Audio menu or Video menu cannot be set to
On. (SNC-VB635/VB630/VB632D/VM630/VM631/
VM632R)
• When the Wide dynamic range (View-DR) setting is
changed, the video codec setting is initialized.
Visibility Enhancer
Using the Visibility Enhancer function will make the
darker part of a camera image brighter as well as
automatically correct brightness and contrast to show
bright parts clearly without overexposure.
Backlight compensation
Select the checkbox to enable the backlight
compensation function.
Exposure compensation
Select the exposure correction value from the list box to
adjust the target brightness for the automatic exposure
setting. A larger value brightens the image, and a smaller
value darkens the image.
Auto gain Max. value
Limit the maximum value of gain-controlled automatic
exposure control.
Note
The value shown in the auto gain maximum rate is a
standard value, and may differ from the actual one.
Shutter speed
Auto-controlled shutter speed automatically sets the
exposure.
Select the minimum and maximum shutter speeds from
the list box.
Notes
Supported models: SNC-VB630/VB632D/VM630/
VM631/VM632R/EB630/EB630B/EB632R/EM630/
EM631/EM632R/XM637/XM636/XM632/XM631
When Wide dynamic range (View-DR) is set to On,
the settings of the shutter speed are not applied.
Supported models: SNC-VB600/VB600B/VM600/
VM600B/VM601/VM601B/VM602R/EB600/
EB602R/EM600/EM601/EM602R
When Wide dynamic range (View-DR) is set to On
and Wide dynamic range (View-DR) level is set to
High, the settings of shutter speed are not applied.
White balance
Mode
Select the White balance mode.
ATW: Eliminating the influences caused by
environmental illumination or lights, adjust the white
balance automatically to reproduce original colors of
the objects (approximately 2000 K to
10000 K).
ATW-PRO: Automatically adjusts the color to be
closest to the image you are viewing (approximately
2500 K to 6000 K).
When AT W or AT W-PRO is selected, R gain offset
and B gain offset become effective.
Indoor: Sets a white balance suitable for indoor
photography.
Outdoor: Sets a white balance suitable for outdoor
photography.
Fluorescent lamp: Sets a white balance suitable for
photography under three-band fluorescent lighting
with a neutral white color.
To Next Page
Loading...
Need help?
General
