26
Inquiry Command List (4/6)
Number in ( ) is MENU display values.
Inquiry Command Inquiry Packet Reply Packet Comments
FOCUS MODE 8x 09 04 38 FF y0 50 0p FF p: 2=Auto Focus, 3=Manual
Focus
FOCUS POSITION 8x 09 04 48 FF y0 50 0p 0p 0p 0p
FF
pppp: Refer to the section of the
Focus Ratio and Focus Distance
(for reference) of VISCA
Command Setting Values
AF MODE 8x 09 04 57 FF y0 50 0p FF p: 0=Normal AF, 1=Interval AF,
2=Zoom Trigger AF
AF MODE INTERVAL 8x 09 04 27 FF y0 50 0p 0p 0q 0q
FF
pp: AF operating time 00 (no
operation), 01 (1 second) - FF
(255 seconds)
qq: AF staying time 00 (no
suspension), 01 (1 second) - FF
(255 seconds)
AF SENSITIVITY 8x 09 04 58 FF y0 50 0p FF p: 2 (Normal), 3 (Low)
NEAR LIMIT 8x 09 04 28 FF y0 50 0p 0p 0p 0p
FF
pppp: Refer to the section of the
Focus Ratio and Focus Distance
(for reference) of VISCA
Command Setting Values
IR CORRECTION 8x 09 04 11 FF y0 50 0p FF p: 0 (Standard), 1 (IR Light)
PAN TILT POSITION 8x 09 06 12 FF y0 50 0p 0p 0p 0p
0t 0t 0t 0t FF
Refer to the section of the Pan/
Tilt Position of VISCA Command
Setting Values for pppp and tttt
STATUS 8x 09 06 10 FF y0 50 pp pp FF pppp: Refer to the section of the
Pan/Tilt status code list
RAMP CURVE 8x 09 06 31 FF y0 50 0p FF p: 1 =Sharpness
PAN-TILT SLOW 8x 09 06 44 FF y0 50 0p FF p: 2=On, 3=Off
PAN TILT LIMIT 8x 09 06 07 0q FF y0 50 0p 0p 0p 0p
0t 0t 0t 0t FF
q: Position (1=UpRight,
0=DownLeft)
Refer to the section of the Pan/
Tilt Position of VISCA Command
Setting Values for pppp and tttt
PAN TILT MAX SPEED 8x 09 06 11 FF y0 50 pp qq FF pp: Pan Max Speed fixed value
(18)
pp: Tilt Max Speed fixed value
(17)
To Next Page
Loading...
Need help?
General
