11
PICTURE Menu
The PICTURE menu is used to set the items related to the
picture.
APERTURE (aperture compensation)
Select the aperture compensation level from among MIN,
1 to 14 and MAX.
HIGH RESOLUTION
You can set this mode to ON or OFF. When set to ON,
you can enjoy emphasised edge and high-resolution
images.
NOISE REDUCTION
You can enjoy clearer images by removing unnecessary
noise (fixed pattern and randomised noise). You can
select 6 levels from OFF (MIN), 1 to 5 (MAX).
PAN TILT ZOOM Menu
The PAN TILT ZOOM menu is used to select the pan/tilt/
zoom mode.
PAN/TILT LIMIT
When you set PAN/TILT LIMIT to ON, you can select
the limit of pan/tilt operation.
You can select the following values:
RIGHT: +100° to –99°, selectable in 1° steps.
LEFT: +99° to –100°, selectable in 1° steps.
UP: +25° to –24°, selectable in 1° steps.
DOWN: +24° to –25°, selectable in 1° steps.
The indicated value is changed when the B or b button is
released. When the pan/tilt function is in motion, the
indicated value does not change.
Setting the range of LEFT/RIGHT movement
The limit of pan/tilt operation becomes effective
promptly after you set the range of PAN/TILT LIMIT.
When you want to make the camera start with the ranges
set, before turning off the power, store those values in
POSITION 1.
For details, see “Storing the Camera Settings in Memory
— the Presetting Feature” (page 16).
Note
Note
–100° +100°
CENTER (0°)
To Next Page
Loading...
Need help?
General
