22
Preset Items
The following items set by using the infrared remote commander and menu items can be stored in the memory of the camera.
Items adjusted with the infrared remote commander
Menu items
z : Setting items retained in memory when the power is turned off and then on again. The camera starts with these settings
stored in POSITION 1.
a : Setting items retained in memory when the power is turned off and then on again.
– : Setting items cleared from the memory when the power is turned off and then on and reset to the initial settings.
For detailed information on POSITION 1, see “Storing the Camera Settings in Memory — the Presetting Feature”
(page 16).
You can store the following items in the memory (POSITION 1), but you can set them only by using the appropriate
VISCA command.
• Focus Near Limit
• IR Receive
• IR Receive Return
For detailed information on the VISCA command list, refer to the Technical Manual of the camera. For details on
obtaining a Technical Manual, consult your Sony dealer.
The setting of preset numbers 1 to 16 are available for VISCA CONTROL and LAN connection.
Preset item Preset position number
12 to 6
Pan/Tilt Position za
Zoom Position za
Focus Mode Auto/Manual za
Focus Position za
Backlight Compensation ON/OFF za
Preset item Preset position number
12 to 6
EXPOSURE MODE za
WDR(VIEW-DR) za
SLOW SHUTTER z –
AE GAIN LIMIT z –
BRIGHT LEVEL za
SPEED za
IRIS za
GAIN za
EX-COMP ON/OFF za
EX-COMP LEVEL za
WHITE BALANCE MODE za
ONE PUSH WB R/B Data z –
MANUAL R/B GAIN za
APERTURE za
HIGH RESOLUTION za
NOISE REDUCTION za
PA N / TI LT L I M I T z –
D-ZOOM za
DISPLAY INFO z –
To Next Page
Loading...
Need help?
General
