Sony SRS-XB33 User Manual

Help Guide
Wireless Speaker
SRS-XB43
Using the BLUETOOTH standby function
When the BLUETOOTH standby function is turned on, the speaker turns on automatically by operating a BLUETOOTH
device, and starts the BLUETOOTH connection.
Before operating the speaker, note the following:
The BLUETOOTH standby function is activated only while the speaker is connected to an AC outlet by the AC
adaptor (supplied). While the speaker is running only on power from the rechargeable built-in battery, the
BLUETOOTH standby function turns off.
Pair the speaker with a BLUETOOTH device in advance. If pairing information is not stored in the speaker, such as
when the speaker is used for the first time after purchase, the speaker will not enter the BLUETOOTH standby mode.
Connect the speaker to an AC outlet with the supplied AC adaptor.
1
Turn on the speaker.
The
(power) indicator lights up in green.
2
Tap [Music Center] on your smartphone, iPhone, etc. to start up the application.
Music Center
3
Tap [SRS-XB43].
4
12

Sony SRS-XB33 Specifications

General

Speaker type	Full range
Number of speakers	1
Impedance	4 Ω
Frequency range	20 - 20000 Hz
RMS rated power	- W
Wi-Fi	No
Bluetooth	Yes
Bluetooth version	5.0
Bluetooth profiles	A2DP, AGHFP, AVRCP, HFP, HSP
USB connector type	USB Type-A
Connectivity technology	Wireless
Product type	Stereo portable speaker
Product color	Red
Product design	Rectangle
International Protection (IP) code	IP67
Cables included	USB
Package depth	126 mm
Package width	264 mm
Package height	136 mm
Battery type	Built-in battery
Battery capacity	2700 mAh
DC input voltage	5 V
Power source type	Battery
Battery life (max)	24 h
Battery recharge time	5 h
Power consumption (standby)	0.3 W
Power consumption (typical)	7.5 W
Recommended usage	Universal
Audio formats supported	AAC, SBC
Microphone direction type	Omnidirectional
Harmonized System (HS) code	85182200

Weight and Dimensions

Depth	106 mm
Width	246 mm
Height	97 mm
Weight	1100 g