Sony STR-DB930 User Manual

те
лун
т
лл
Automatic
Tuning
For
details
on
the
buttons
used
in
this
section,
see
“Brief
descriptions
of
buttons
used
to
receive
broadcasts”
on
page
44.
1 Rotate FUNCTION to select the tuner.
The last received station is tuned in.
2
Press
FM/AM
to
select
the
FM
or
AM
band.
3 Press TUNING + or TUNING -.
Press
the
+
button
to
scan
from
low
to
high;
press
the
–
button to scan from high to low.
When
the
receiver
reaches
either
end
of
the
band
Scanning
is
repeated
in
the
same
direction.
The
receiver
stops
scanning
whenever
a
station
is
received.
4
Tocontinue
scanning,
press
TUNING
+
or
TUNING
–
again.
ЕЕЕ
Preset Tuning
For details on the buttons used in this section, see “Brief
descriptions of buttons used to receive broadcasts” on
page 44.
Before tuning to preset stations, be sure to preset them by
performing steps on “Presetting radio stations” below.
Presetting radio stations
1 Rotate FUNCTION to select the tuner.
The last received station is tuned in.
2 Tune in the station that you want to preset using
Direct Tuning (page 44), or Automatic Tuning (this
page).
З Press MEMORY.
“MEMORY” appears in the display for a few seconds.
Do Steps 4 to 6 before “MEMORY” goes out.
4 Press SHIFT to select a memory page (A, B or C).
Each time you press SHIFT, the letter “A,” “В” or “С”
appears in the display.
5 Select a preset number by pressing PRESET TUNING
+ or PRESET TUNING -.
If “MEMORY” goes out before you press the preset
number, start again from Step 3.
6 Press MEMORY again to store the station.
If “MEMORY” goes out before you can store the
station, start again from Step 3.
7 Repeat Steps 2 to 6 to preset another station.
To change a preset number to another station
Do
Steps
1
to
6
to
preset
the
new
station
to
the
number.
Note
If the AC power cord is disconnected for about two weeks, all the
preset stations will be cleared from the receiver’s memory, and
you will have to preset the stations again.
45
зазезреола Би!лтәзәм
Y

Sony STR-DB930 Specifications

General

Brand	Sony
Model	STR-DB930
Category	Receiver
Language	English