63
US
F:\Sony SEM
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm
masterpage: Right
STR-DG800
2-667-346-12 (1)
Enjoying Surround Sound
If you connect a sub woofer
This receiver will generate a low frequency
signal for output to the sub woofer when there
is no LFE signal, which is a low-pass sound
effect output from a sub woofer to a 2 channel
signal. However, the low frequency signal is
not generated for “NEO6 CINEMA” or
“NEO6 MUSIC” when all speakers are set to
“LARGE”.
Notes
• This function does not work when MULTI CH IN
or ANALOG DIRECT is selected.
• DTS Neo:6 does not work for DTS 2CH audio, the
sound is played as 2 channel.
• Dolby Pro Logic IIx decoding does not function for
DTS format signals or for signals with a sampling
frequency of more than 48 kHz.
Tip
When a multi channel signal is input, only Dolby
Pro Logic IIx decoding is effective. When you select
decoding modes other than Dolby Pro Logic IIx,
multi channel sound (being encoded) is output.
Selecting a pre-
programmed sound field
You can take advantage of surround sound
simply by selecting one of the receiver’s pre-
programmed sound fields. They bring the
exciting and powerful sound of movie theaters
and concert halls into your home.
Press MOVIE repeatedly to select a
sound field for movies or press
MUSIC repeatedly to select a sound
field for music.
For details, see “Types of sound field
available” (page 64).
TV/SAT
MD/TAPE
TUNER
PHONO
2ND ZONE
2CH A.F.D. MOVIE MUSIC
SLEEP
CATEGORY
MODE
D. TUNING AUTO CAL
SA-CD/CD
MULTI CH SOURCE
MUSIC
MOVIE
continued
US01COV_STR-DG800-CEL.book Page 63 Tuesday, March 14, 2006 3:53 PM
To Next Page
Need help?
General
