21
GB
D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Right
STR-DN610
4-167-824-13(1)
Connections
Notes
• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
• Connect image display components such as a TV
monitor or a projector to the HDMI TV OUT or
MONITOR OUT jack on the receiver. You may
not be able to record even if you connect recording
components.
• Depending on the status of the connection between
the TV and the antenna (aerial), the image on the
TV screen may be distorted. In this case, place the
antenna (aerial) farther away from the receiver.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
4a: Connecting the audio
components
The following illustration shows how to
connect a Super Audio CD player, CD player,
CD recorder and DIGITAL MEDIA PORT
adapter. Before connecting cords, be sure to
disconnect the AC power cord (mains lead).
ANTENNA
1 NI2 NI3 NI
HDMI
ASSIGNABLE (INPUT
TV
IN
OPTICAL
SAT/
CATV
IN
OPTICAL
DVD
IN
DIGITAL
COAXIAL
(ASSIGNABLE)
P
B
/
C
B
P
R
/
C
R
Y
IN 3 IN 2 IN 1
MONITOR
OUT
COMPONENT VIDEO
ASSIGNABLE (INPUT ONLY)
VIDEO
IN
VIDEO
IN
VIDEO
OUT
VIDEO
IN
AUDIO
IN
AUDIO
OUT
AUDIO
IN
BD
SAT/CATV
AUDIO
IN
VIDEO 1
AUDIO
IN
AUDIO
OUT
TV
SUBWOOFER
SA-CD/CD/CD-R
R
DC5V
0.7A MAX
MONITOR
AUDIOAUDIO
OUT
IN
VIDEO
OUT
DMPORT
L
Super Audio CD
player, CD player,
CD recorder
A Audio cord (not supplied)
B Video cord (not supplied)
DIGITAL MEDIA
PORT adapter
TV
BA
continued
To Next Page
Loading...
Need help?
General
Weight and Dimensions
