TDG-BR100 4-180-470-23(1)
6 (GB)
TDG-BR100 4-180-470-23(1)
Battery Cover
Detaching the cover when replacing the battery.
Before use: Remove the battery’s insulating sheet
before using the product for the first time.
LED indicator
Flashes one time every 3 seconds: Power on
Flashes three times every 3 seconds: Low battery: Battery capacity is
almost running out.
Flashes three times: Power off
IR Sensor
Receiving signals from the 3D Sync Transmitter.
This part receives IR
(infrared rays) from the
3D Sync Transmitter.
IR’s entry angle differs according to distance or usage environment.
Note
Please keep the IR Sensor clean.
Power Button
Power on: Press once
Power off: Hold power button down for 2 seconds
* Auto power off: More than 5 minutes without IR signal
Nose pad
Adjust the nose pad for a comfortable fit.
Temple frames
You can bend (adjust) the temple frames for a comfortable fit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
