12
VPL-CX61/CX63/CX75/CX76/CX80/CX85/CX86/CX100/CX120/CX125/CX150/CX155/CW125/FE40/FE40L/FH300L/FX40/FX40L/FX51/FX52/FX52L/FW300L/PX35/PX40/PX41
3-3-2. Items
Category Contents SET GET
00**h Used to control and to change the various setups. OO
01**h Used to acquire the status. O
03**h Used to reset memory. O
17**h Sircs (15 bit category) O
19**h Sircs (20 bit category) O
80**h Used to acquire equipment information. O
90**h Used to acquire network setup information. O
3-3-2-1. Model Dependent Category
The supported contents of 00**h, 01**h, 03**h, 17**h and 19**h change depending on the model.
Details are shown on Appendix.
3-3-2-2. Equipment Information Acquisition (80**h)
Used to acquire the equipment information.
Lower byte Contents SET GET
00h Category Code O
01h Model name O
02h Serial number O
03h Installation location OO
0x8000 Category code
1 byte
0x8001 Model name
Alphanumeric 12 characters
If the number of characters is less than 12, the remaining digits are filled with 00h.
0x8002 Serial number
4 bytes
n
The serial number is in the range of 00000000 to 99999999.
0x8003 Installation location
Alphanumeric 24 characters
If the number of characters is less than 24, the remaining digits are filled with 00h.
To Next Page
Loading...
Need help?
General
