26
VPL-CX61/CX63/CX75/CX76/CX80/CX85/CX86/CX100/CX120/CX125/CX150/CX155/CW125/FE40/FE40L/FH300L/FX40/FX40L/FX51/FX52/FX52L/FW300L/PX35/PX40/PX41
Appendix A. Setup Method For VPL-PX35 and PX40
Establishing the network setup such as IP address can be implemented from the PC browser, and the
information such as installation location can be viewed on the PC browser.
A-1. Command
A-1-1. Setting
Enter the following command using the format shown below in a browser as URL, and then the simple
response is returned.
Format
http://IP address/Item?Value
IP address The IP address that is assigned to the network block
Item Name of the setup item
Value Setting value
Response
The following HTML is returned that enables to confirm OK or NG simply.
<HTML>
<TITLE>
IP address
</TITLE>
<BODY>
< Equipment name: Serial number><BR><BR>
Result [Item = Value]
</BODY>
</HTML>
IP address The IP address that is assigned to the network block
Equipment name Name of the equipment in which setup is implemented
Serial number Serial number of the equipment in which setup is implemented
Result Result (OK or NG) is displayed.
Item Name of the setup item
Value Setting value
To Next Page
Loading...
