27
VPL-CX61/CX63/CX75/CX76/CX80/CX85/CX86/CX100/CX120/CX125/CX150/CX155/CW125/FE40/FE40L/FH300L/FX40/FX40L/FX51/FX52/FX52L/FW300L/PX35/PX40/PX41
A-1-2. Display
Enter the following command using the format shown below in a browser as URL, and then value of the
setting item is displayed.
Format
http://IP address/Item
IP address The IP address that is assigned to the network block
Item Name of the setup item
Response
The following HTML is returned.
<HTML>
<TITLE>
IP address
</TITLE>
<BODY>
< Equipment name: Serial number><BR><BR>
Result [Item = Value]
</BODY>
</HTML>
IP address The IP address that is assigned to the network block
Equipment name Name of the equipment that has acquired the setup value
Serial number Serial number of the equipment that has acquired the setup value
Result Result (OK or NG) is displayed.
Item Name of the setup item
Value Setting value
To Next Page
Need help?
General
