South-Tek Systems N2 Blast FPS-900-RS User Manual

P
The Leader in Nitrogen Generation Technology
FPS-900-RS O&M Manual
Version: 3; 3/2020
Page 12 of 28
The nitrogen tank comes with ball valves, safety relief, and a gauge. The outlet gas connects
to an external manual ball valve for easy plug and play connection.
6.1.6. Automatic Cut-In and Cut-Out
The generator starts and stops based on a pressure switch. Do not adjust the factory preset
cut-in and out pressure without first consulting with South-Tek Systems.
6.1.7. Patented BlastOff
®
– Leak Detection System
The BlastOff
®
Leak Detection System is a patented feature which sends an alarm if it detects
a possible gas leak. The alarm signal can be an audible, visual, and Fire Alarm Control
Panel. Power cycle the unit to reset the alarm, but avoid doing this multiple times, without
finding the cause, as it will shorten the generator’s life.
6.2. Specifications
N2-Blast FPS-900-RS
Nitrogen Purity
98.5+%
Installation
Internally Integrated (PrePak)
Display
Hours / Run / Standby Alarms
N
2
Storage Pressure
60-70 PSIG (+/-5%)
Cabinet Port Connections
½” NPT Female
Electrical
110-220V / 50-60 Hz / 1 Phase; 10 Amp Fuse
Compressor
Integral / Oil-Free
Ambient Temperature
40° to 100°F
Noise Level (dbA)
< 90 dbA
Size
5”W x 19”D x 12”H (Cabinet Dimensions)

South-Tek Systems N2 Blast FPS-900-RS Specifications

General

Brand	South-Tek Systems
Model	N2 Blast FPS-900-RS
Category	Safety Equipment
Language	English