South-Tek Systems N2 Blast FPS-900-RS User Manual

P
The Leader in Nitrogen Generation Technology
FPS-900-RS O&M Manual
Version: 3; 3/2020
Page 2 of 28
TABLE OF CONTENTS:
1. INTRODUCTION…………………………………………………………………………………………. 3
1.1. General Purpose
1.2. Audience
1.3. Important Information
1.4. Limits of Liability
1.5. Service Return Policy
2. SAFETY GUIDELINES…………………………………………………………………………………… 5
2.1. General
3. RECEIVING, UNPACKING, AND STORAGE INSTRUCTIONS…………………………………….. 7
3.1. Unpacking and Preparation
4. SITE AND UTILITY REQUIREMENTS…………………………………………………………………. 8
4.1. Air Supply
4.2. Additional Piping’s and Hosing’s
4.3. Electrical Requirements
4.4. Site Specifications
5. PRODUCT INSTALLATION……………………………………………………………………………… 9
5.1. Installation Arrangement
6. SYSTEM DESIGN ………………………………………………………………………………………..11
6.1. Key Features
6.2. Specifications
7. SYSTEM OPERATION …………………………………………………………………………………..13
7.1. General
7.2. Controller Modes
7.3. Normal Run / Standby Mode
7.4. Stopping the System
7.5. Alarm Mode
7.6. Communication (Modbus RTU)
8. START-UP PROCEDURES ……………………………………………………………………………..18
8.1. Start-Up Procedures
8.2. Checking for Leaks
9. SYSTEM MAINTENANCE ……………………………………………………………………………….21
9.1. Air Intake Filter
9.2. Air Filter Replacement
10. KEY CONTACTS …………………………………………………………………………………………23
11. FAQs ……………………………………………………………………………………………………….24
11.1. Power Issues
11.2. Pressure Issues
11.3. Gas Leaks
APPENDIX A: Advanced Options ……..…………………………………………………………………….25
APPENDIX B: WARRANTY ………………………………………………………………………………….28

South-Tek Systems N2 Blast FPS-900-RS Specifications

General

Brand	South-Tek Systems
Model	N2 Blast FPS-900-RS
Category	Safety Equipment
Language	English