EasyManuals Logo

Star Micronics SP 200 User Manual

Star Micronics SP 200
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Problem Solution
Paper gets wrinkles.
Paper is damp. Use paper that has been stored properly.
Paper is too thin. See p.9 "Supported Paper".
If there are gaps between the paper and the paper
guides, adjust the paper guides to remove the gaps.
The printed paper is curled.
Load the paper upside down in the input tray.
Paper is damp. Use paper that has been stored properly.
Images are printed diagonally to the
pages.
CER091
If there are gaps between the paper and the paper guides,
adjust the paper guides to remove the gaps.
Removing Printing Jams
Jammed paper may be covered in toner. Be careful not to get toner on your hands or clothes.
Toner on prints made immediately after clearing a paper jam may be insufficiently fused and can
smudge. Make test prints until smudges no longer appear.
Do not forcefully remove jammed paper, as it may tear. Torn pieces remaining inside the machine
will cause further jams and possibly damage the machine.
Paper jams can cause pages to be lost. Check your print job for missing pages and reprint any
pages that did not print out.
Paper Feed Problems
33

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Star Micronics SP 200 and is the answer not in the manual?

Star Micronics SP 200 Specifications

General IconGeneral
BrandStar Micronics
ModelSP 200
CategoryPrinter
LanguageEnglish

Related product manuals