14
Iss 3
Safety warning and user guidance
Lifting heavy or bulky components
Please note that these instructions are to be used as a guide only.
Seat:
1. Lift armrests upwards for ease of access (Photo 7).
2. Stand behind seat and pull backrest recline lever to fold the backrest
down (Photo 8).
3. Grasp the seat base and lift the seat swivel lever (photo 9).
4. Keeping a firm grip, lift the seat vertically, keeping your back straight.
Bend knees if required (Photo 10).
5. Place seat at desired location for stowage, keeping back posture
straight at all times, bend knees where required.
Batteries:
1. Stand behind the scooter and remove the seat as above.
2. Grab the rear body panel with both hands and carefully lift it off, taking
care to clear the seat post (Photo 11).
3. Undo the two battery straps (Photo 12).
4. Disconnect the red and the black battery connectors (Photo 13).
5. Keeping back posture upright and bending knees if required, carefully
lift the batteries clear one at a time (Photo 14).
6. Place battery pack at desired location for stowage, keeping back
posture straight at all times, bend knees where required.
Photo 7
Photo 8
Photo 9
Photo 10
Photo 11
Photo 12
Photo 13
Photo 14
To Next Page
Loading...
Need help?
General
