17
Iss 3
Safety warning and user guidance
Photo 20
Armrest Adjustment
The width of the armrests can be adjusted by loosening the two thumbwheel knobs
located under the seat base, moving the armrests to the desired position and re-
tightening the thumbwheel knobs.
The angle of the armrests can be adjusted by lifting the armrest up and moving the
6mm screw clockwise (to increase angle) and anti-clockwise (to reduce the angle).
Tiller Adjustment
The scooter features an adjustable tiller which allows you to lock the tiller in the most
comfortable driving position. This feature also lets you fold the tiller down fully, for
transportation and stowage.
There are five (5) angle-adjustable positions.
The tiller release lever is located on the lower left side of the tiller (Photo 20).
1. Support the tiller with your right-hand, and push the release lever in towards the
adjustment plate to release the tiller for adjustment (Photo 21).
3. Move the tiller to the desired locating hole (Photo 22).
4. Pull the release lever away from the adjustment plate.
5. Carefully rock the tiller back and forth to ensure that it is securely engaged into the
locking mechanism. An audible “click” is heard as the mechanism locks (Photo 23).
Photo 21
Photo 22
Photo 23
To Next Page
Loading...
Need help?
General
