31
FR
EN
Adjusting the angle of auxiliary handle: illustration
2.2
Loosen the knob and slide the auxiliary handle 5 up or downward to adjust the height to t the intended
application.
Tighten the knob in the adjusted position. Ensure that the tooth system locks in place.
NOTE: Ensure the connection is properly secured. Tighten the knob so far until there is not gap between
the handle and handle support.
Attaching the guard: illustration
2.3
1.Insert the guard to the power head.
2. Insert the screw through the guard and into the power head. Use the screw driver to tighten the screw
securely.
3. Insert the ower guard 10 to the power head 7.
4. Remove the grass knife protective tap.
While operating: illustration
3.1
Wear safety glasses.
Wear protective gloves.
Wear ear protection.
Wear protective overalls.
Adjusting the height of the auxiliary handle: illustration
3.2
Loosen the knob and slide the auxiliary handle 5 up or downward to adjust the height to t the intended
application. Tighten the knob in the adjusted position. Ensure that the tooth system locks in place.
Connecting to the mains: illustration
3.3
Fix the power line to the handle hook and connect plug to the mains.
4.3 FIRST USE
WARNING ! Read the « SAFETY INSTRUCTION » section at the
beginning of this manual including all text under subheading
therein before using this product.
Pay particular attention using the machine for the rst time : focus and dedicate all
your attention to this rst use. Make the rst trial on a free space with no obstacle and no surrounding
element
4.4 OPERATION
Start the product : illustration
4.1
Press the lock-o button 1 and hold it in position.
Press the on/o switch 2 to switch the product on. Release the lock-o button 1 once the product is
running. Release the on/o switch 2 to switch the product o.
WARNING ! Never attempt to lock the on/off switch in its ON
position!
To Next Page
Loading...
Need help?
General