1. Choke Command - Cold start.
The «CHOKE» position enriches the
1. Maximum engine speed. To
during grass cutting operations.
2. Minimum engine speed. Used
NOTE When moving from one area
to another, put the lever in a position
between «tortoise» and «hare».
5.3 PARKING BRAKE LEVER
10.D), corresponding to:
1. Brake disengaged. Press the
2. Brake engaged. Press the pedal all
and shift the lever to
5.4 CLUTCH / BRAKE PEDAL
1.
acts as a clutch, engaging and
2.
.
IMPORTANT Do not keep the pedal
half way between clutch engagement or
disengagement, as this can cause overheating
and damage the transmission belt.
NOTE When the machine is in
movement, keep your foot o the pedal.
5.5 SPEED CHANGE LEVER
1. 5 forward gears
Gear must only be engaged
when the machine has stopped.
2. Neutral «N»
3.
Reverse must only
be engaged when the
machine has stopped.
according to the indications on the label.
5.6 BRAKE PEDAL
5.7
1. To
the pressure on the pedal
2. Reverse gear
Reverse must only
be engaged when the
machine has stopped.
To Next Page
Loading...
Need help?
General
