1. GENERAL INFORMATION
1.1 HOW TO READ THIS MANUAL
NOTE or IMPORTANT These give details
or further information on what has been
previously indicated and aim to prevent damage
to the machine or cause other damage.
The
1.2 REFERENCES
1.2.1 Figures
WARNING!: READ THIS MANUAL CAREFULLY BEFORE
EN
INDICE
1. GENERAL INFORMATION ........................... 1
2. SAFETY REGULATIONS .............................. 2
2.4 Maintenance, storage and transport...... 3
3. ABOUT THE MACHINE ................................ 4
3.1 Machine description and intended use.. 4
.......................................... 4
................................ 5
................................. 5
4. ASSEMBLY ................................................... 5
.......................... 5
cables ................................................... 6
.................................. 6
............................. 6
.................... 6
4.6 Mounting the auger extension (ST 767 H)
.............................................................. 6
4.7 Levelling shoes ..................................... 6
5. CONTROLS.................................................. 7
............................................ 7
5.2 Fuel tap ................................................. 7
................................. 7
................................... 7
................................................... 7
5.6 Manual starting grip .............................. 7
....................... 7
..................................... 7
5.9 Steering lever ........................................ 7
5.10 Auger control ......................................... 8
5.11 Gear lever ............................................. 8
handle) .................................................. 8
............................ 8
(optionals) ............................................. 8
5.15 Lifting pedal .......................................... 8
6. USING THE MACHINE ................................. 8
.......................... 9
6.2 S ........................................ 9
6.3 Starting / operation ................................ 9
6.4 Stop .................................................... 10
6.5 Operating suggestions ........................ 11
6.6 After use .............................................. 11
7. MAINTENANCE ......................................... 11
............................ 11
7.2 Refuelling ............................................ 11
...................... 12
7.4 Cleaning .............................................. 12
........................................... 12
7.6 Carburettor .......................................... 12
7.7 Nuts and bolts ..................................... 13
7.8 Auger shaft .......................................... 13
8. STORAGE .................................................. 13
9. ASSISTANCE AND REPAIRS ..................... 13
10. WARRANTY COVERAGE .......................... 13
11. MAINTENANCE TABLE .............................. 14
12. TROUBLESHOOTING ............................... 15
To Next Page
Loading...
Need help?
General
