63
SWP 355
EN
The telescopic sliding bracket (1) can be adjusted
to the height of the user in three levels.
1. Press the locking springs (2) inwards on both
sides of the telescopic sliding bracket.
2. Adjust the telescopic sliding brackets
according to your height.
» The locking springs (2) must lock into the
desired position audibly and visibly.
metal or other sharp edged materials.
• Wear the prescribed personal protective
equipment!
CAUTION
The inhalation of dusts can endanger the
health.
• Wear the prescribed personal protective
equipment!
• Check the device to make sure that it is functioning
before starting work.
• Check the telescopic sliding bracket to make sure
• Check the sweeping container to make sure it is
•
roller for rolled up threads and cords. Remove these
if necessary.
•
roller for jammed items or contamination.
• Check the handle for contamination and clean its if
necessary.
The heights of the brooms is adjusted in the middle
of the front part. The height adjustment sets the plate
brooms to the surface to be swept. The levels are
based on empirical values and must therefore be con-
sidered as the levels are based on empirical values
and must therefore be regarded as reference values.
may need to be made depending on the surface.
•
•
surfaces (e.g. washed concrete slabs)
• Level 3: for heavy soiling and severely uneven
surfaces
2
1
To Next Page
Loading...
Need help?
General
