Stihl 9 User Manual

6WDUWLQJ
Chain brake engaged
Top: Stop switch away from
G
Center: Choke slide on I - cold start
Bottom: Starting throttle position
3
125BA014 LA
2
125BA013 LA
1
125BA012 LA
125BA016 LA
6
5
4
Before starting your saw, make sure you have a firm foot-
hold and check that the saw chain is not touching the ground
or any other obstacles. Bystanders must be kept well clear
of the general work area of the saw.
6WDUWLQJSURFHGXUH
1. Engage the chain brake by pushing the hand guard 
towards the bar nose.
2. Move stop switch  away from I.
3. If engine is cold, move choke slide  to I. This also
applies if the engine has been running but is still cold.
If engine is warm, move choke slide away from I.
4. Set throttle trigger  to start position by pressing the
safety throttle lock , throttle trigger  and starting
throttle lock  in that order. Then let go of throttle
trigger  first and then the starting throttle lock .


Stihl 9 Specifications

General

Brand	Stihl
Model	9
Category	Saw
Language	English