0458-807-8621-A
19
English
14 Inserting and Removing the Battery
To mount the nozzle:
► Align the nozzle mounting lugs (3) with the groove on the
nozzle (2) and push the nozzle (1) onto the blower
tube (4).
► Rotate the nozzle in the direction of the arrow until it stops.
The nozzle should lock in position.
► To remove the nozzle, reverse the sequence of steps
above.
14.1 Inserting the Battery
WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 6.1. Use and store the battery only
within an ambient temperature range of 14 °F to 122 °F (- 10
°C to 50 °C), @ 6.1.
WARNING
To reduce the risk of unintended activation, never store the
battery in the blower, @ 20.2.
To insert the battery:
► Place the blower on a level surface.
► Insert the battery (1) into the battery compartment (2) until
you hear an audible click.
In this position, the arrows (3) on the battery are still
visible and the battery is locked in the battery
compartment. There is no electrical contact between the
battery and the blower.
► To supply power to the blower, push the battery into the
battery compartment until it stops.
The battery is properly inserted when you hear a second
audible click and the battery is flush with the top of the
housing. In this position, there is electrical contact
between the battery and the blower.
Since a new battery is not fully charged, STIHL recommends
that you fully charge the battery before using it the first time,
@ 11.
14.2 Removing the Battery
WARNING
To reduce the risk of severe personal injury from unintended
activation, always remove the battery before assembling,
transporting, adjusting, cleaning, servicing, maintaining or
storing the blower and any other time it is not in use.
WARNING
Use care when ejecting the battery to prevent it from falling
and causing personal injury or property damage.
14 Inserting and Removing the Battery
To Next Page
Loading...
Need help?
General
Weight and Dimensions
