FC 91
English
24
Checking the protection against wear
N Before starting up the machine,
check that the protection against
wear (1) is not damaged
N Replace the protection against wear
at the latest when the gearbox (2)
becomes visible (arrow)
NOTICE
If worn deflectors are not replaced in
time, this can cause serious damage to
the gearbox.
Replacing the protection against wear
N Remove the blade – see "Fitting the
blade"
N Unscrew screws (4)
N Replace the protection against
wear (5)
N Screw in and tighten screws (4)
N Fit the blade – see "Fitting the
blade"
Checking and Replacing the
Wear Guard
To Next Page
Loading...
Need help?
General
