Original Instruction ManualPrinted on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2014
0458-471-8621-A. VA1.L14.
0000006833_002_GB
FCB-KM
English
1
{
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Contents
Allow only persons who fully understand
the manuals of the KombiEngine and
edger KombiTool to operate this power
tool combination.
To receive maximum performance and
satisfaction from your STIHL
KombiTool, it is important that you read,
understand and follow the safety
precautions and the operating and
maintenance instructions in chapter
"Safety Precautions and Working
Techniques" before using your
KombiTool. For further information you
can go to www.stihlusa.com.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in the
two manuals.
WARNING
Because a KombiEngine equipped with
an edger KombiTool has a high-speed
cutting attachment some special safety
precautions must be observed to reduce
the risk of personal injury. Careless or
improper use may cause serious or even
fatal injury.
KombiSystem 2
Guide to Using this Manual 2
Safety Precautions and Working
Techniques 3
Using the Unit 9
Approved KombiEngines 11
Assembling the Unit 11
Mounting the KombiTool 12
Mounting the Cutting Blade 12
Starting / Stopping the Engine 13
Storing the Machine 14
Replacing the Depth Wheel 14
Replacing the Skirt 14
Replacing the Cutting Blade 15
Checking and Replacing the Wear
Guard 15
Maintenance and Care 16
Main Parts 17
Specifications 18
Maintenance and Repairs 18
Disposal 19
Trademarks 19
To Next Page
Loading...
Need help?
General
