Stihl FS 111 User Manual

FS 111, FS 111 R
English
20
The following STIHL attachments may
be mounted to the basic power tool:
Mounting Bike Handle with Swiveling
Handle Support
The machine is supplied with the
swiveling handle support already
mounted on the shaft. To mount the
handlebar it is necessary to remove the
clamp moldings.
Removing the Clamp Moldings
N Hold the lower clamp (1) and upper
clamp (2) firmly together.
N Release the wing screw (3) – the
clamps are loose once the wing
screw has been released. They are
pushed apart by the two
springs (4 and 5).
N Pull out the wing screw – the
washer (6) remains on the wing
screw.
N Separate the clamp moldings – the
springs (4 and 5) remain in the
lower clamp.
Securing the Handlebar
N Place the handlebar (7) in the lower
clamp (1) so that distance A is no
more than 15 cm (6 in).
N Place the upper clamp in position
and hold both clamp moldings
together.
N Push the wing screw through the
two clamps as far as stop – hold all
parts together and secure them.
Approved Power Tool
Attachments
Attachment
1)
not approved for bike-handled
machines
2)
shoulder strap not necessary
3)
use barrier bar on loop-handled
machines
Application
BF Cultivator
FCS
1) 2)
Edger
FH 145° Power scythe
HL 0°
1)
Long reach hedge
trimmer
HL 145°
1)
Long reach hedge
trimmer
HT
1)
Pole pruner
RG
3)
Weeder
KB (4601)
1)
Bristle brush
KW (4601)
1)
PowerSweep
Mounting the Bike Handle
1
7
A
250BA046 KN

Stihl FS 111 Specifications

General

Type	Brush cutter
Cordless	Yes
Head type	Blade
Handle type	U-type handle
Engine power	1.45 hp
Product color	Black, Metallic, Orange
Number of strokes	4
Sound power level	108 dB
Fuel tank capacity	0.71 L
Vibration emission	5.3 m/s²
Engine displacement	31.4 cm³
Sound pressure level	96 dB
Cutting diameter (max)	- mm
Power source	Gasoline

Weight and Dimensions

Length	1800 mm
Weight	5800 g