0458-507-0121-A
31
English
19 Specifications
19.2 Noise and Vibration Data
K-value (uncertainty) for sound pressure level is 2 dB(A). K-
value (uncertainty) for sound power level is 2 dB(A). K-value
(uncertainty) for vibration level is 2 m/s².
Using a mowing head
– Sound pressure level L
p
measured according to
ISO 22868: 99 dB(A)
– Sound power level L
w
measured according to ISO 22868:
111 dB(A)
– Vibration level ahv, eq measured according to ISO 22867
– Control handle: 4.1 m/s².
– Left handle: 5.1 m/s²
Using a metal cutting attachment
– Sound pressure level L
p
measured according to
ISO 22868: 99 dB(A)
– Sound power level L
w
measured according to ISO 22868:
111 dB(A)
– Vibration level ahv, eq measured according to ISO 22867
– Control handle: 2.9 m/s².
– Left handle: 4.3 m/s²
Information on compliance with Vibration Directive
2002/44/EC is available at www.stihl.com/vib.
19.3 REACH
REACH is an EC regulation and stands for the Registration,
Evaluation, Authorisation and Restriction of Chemical
substances.
For information on compliance with the REACH regulation
see www.stihl.com/reach.
19.4 Exhaust Emissions
The CO
2
value measured in the EU type approval procedure
is specified at www.stihl.com/co2.
The measured CO
2
value was determined on a
representative engine in accordance with a standardized
test procedure under laboratory conditions and does not
represent either an explicit or implied guarantee of the
performance of a specific engine.
The applicable exhaust emission requirements are fulfilled
by the intended usage and maintenance described in this
instruction manual. The type approval expires if the engine
is modified in any way.