0458-507-0121-A
4
English
3 Overview
5 Spark Plug Boot
Connects ignition lead to spark plug
6Spark Plug
Ignites fuel-air mixture in the engine.
7 Muffler
Reduces trimmer noise emissions.
8 Starter Grip
Serves to crank the engine.
9 Carburetor Adjusting Screws
For tuning the carburetor.
10 Fuel Tank Cap
Closes the fuel tank.
11 Handle
For holding and controlling the trimmer.
12 Throttle Cable
Connects the throttle trigger to the engine.
13 Shaft
Connects all components.
14 Throttle Cable Retainer
Secures throttle cable in position.
15 Slide Control
For starting, running and stopping the engine.
16 Throttle Trigger Lockout
Unlocks the throttle trigger.
17 Throttle Trigger
Controls engine speed.
18 Carrying Ring
For attaching carrying system.
19 Control Handle
For operating, holding and controlling the trimmer.
20 Handlebar Clamp
Connects handlebar to the drive tube.
21 Handlebar
Connects control handle and left grip to drive tube.
22 Gear Housing
Encloses the gearbox.
23 Opening for Stop Pin
Accommodates the stop pin.
24 Stop Pin
Blocks shaft while cutting attachment is being mounted.
25 Screw Plug
Closes filler opening for STIHL gear grease.
# Rating Label with Serial Number
3.2 Deflectors and Cutting Attachments
The illustrations show examples of deflectors and cutting
attachments. Approved combinations are listed in this
instruction manual, @ 20.
1 Universal deflector
Protects user from flying debris and contact with the
cutting attachment.
2 Grass Cutting Blade
Cuts grass and weeds.
3Brush Knife
Cuts brushwood.
6
8
0000-GXX-8194-A0
1
2
7
3
9
1
4
5
To Next Page
Loading...
Need help?
General
