f the engine is low on power, check the
spark arrester inside the muffler.
•
Slacken off the screws ,
don’t remove them.
•
Pull the spark arrester out from
behind the cover .
•
Clean the spark arrester if
necessary.
•
If spark arrester is damaged or
coked up, fit a new one.
•
Reftit the spark arrester.
•
Assemble in the reverse sequence.
6SDUN$UUHVWHULQ0XIIOHU
343BA052
For periods of about 3 months or longer:
•
Drain and clean the fuel tank.
•
Run engine until carburetor is dry -
this helps prevent the carburetor
diaphragms sticking together.
•
Remove, clean and inspect the
cutting tool.
•
Thoroughly clean the machine -
pay special attention to the
cylinder fins and air filter.
•
Store the machine in a dry, high or
locked location - out of the reach
of children and other unauthorized
persons.
6WRULQJWKH0DFKLQH
)6