Stihl FS 360 User Manual

FS 260 C, FS 360 C
English
15
Mounting Bike Handle with Swivelling
Handle Support
The machine is supplied with the clamp
moldings (1) mounted to the
handlebar (2).
Mounting the Control Handle
N Take out the screw (3) and remove
the nut (4) from the control
handle (5).
N Line up control handle (5) in relation
to handlebar (2): Throttle trigger (6)
must point toward the gearbox and
the clamp screw (7) toward the
engine.
N Holding the control handle (5) in
that position, push it on to the end of
the handlebar (2) and line up the
holes (8).
N Fit the nut (4) in the control
handle (5), insert the screw (3) and
tighten it down firmly.
Assembling the Handle Support
To assemble the swivelling handle
support it is necessary to fit a spring in
the clamps and secure them to the
handle support on the machine.
Mounting the Bike Handle
2
1
6BA018 KN
3
4
5
002BA352 KN
7
5
6BA002 KN
6
2
8
6BA019 KN
2
8
3
5
4

Stihl FS 360 Specifications

General

Brand	Stihl
Model	FS 360
Category	Trimmer
Language	English