Stihl FS 360 User Manual

FS 260 C, FS 360 C
English
16
N Use the spring (9) from the parts kit
supplied with the machine.
N Place the spring (9) in the lower
clamp molding (10).
N Position the clamp moldings (1) with
handlebar (2) on the handle
support (11).
N Raise the grip of the wing screw (7)
to the upright position.
N Turn the wing screw
counterclockwise as far as stop.
N Push the wing screw into the handle
support as far as stop and then
screw it down – but do not finally
tighten yet.
N Adjust the handlebar (2) so that
distance A is no more than 15 cm.
N Line up the handlebar at a right
angle to the drive tube.
N Turn the wing screw clockwise as
far as stop.
N Fold the grip of the wing screw down
so that it is flush.
FS 260: Fitting the Throttle Cable
NOTICE
Do not kink the throttle cable or lay it in
tight radii – make sure the throttle trigger
moves freely.
N Attach the throttle cable (12) to the
retainer (13).
6BA001 KN
9
10
11
1
6BA020 KN
2
A
6BA003 KN
2
7
6BA005 KN
6BA006 KN
12
13
002BA439 KN
13
12

Stihl FS 360 Specifications

General

Brand	Stihl
Model	FS 360
Category	Trimmer
Language	English