Stihl FS 361 C-M User Manual

0458-838-8601-A
42
English 20 Inspection and Maintenance
20.1 Inspection and Maintenance Chart
1)
STIHL recommends an authorized STIHL servicing dealer
20 Inspection and Maintenance
The following maintenance intervals are examples and apply for normal
operating conditions. Actual use and your experience will determine the
frequency of required inspection and maintenance.
Before starting work After finishing work or daily Whenever fueling Weekly Monthly Yearly Relevant Chapter
Complete Machine Visual inspection XX
Clean X @ 19.1
Controls Check function and condition XX @ 13.1
Fuel Tank Clean
1)
X
Fuel Pick-Up Body / Filter Clean
1)
X
Replace
1)
X
Air Filter Visual inspection X
Cutting Attachment Visual inspection XX
Check if properly and securely
tightened
XX
Sharpen a metal cutting attachment X
Air intake on fan housing Clean XX
Cylinder fins Clean X
Spark arresting screen in muffler Check and Clean
1)
X
Spacer Check X
Gearbox Check, if grease is visible on the
drive shaft before mounting a
cutting attachment.
If grease is visible, check gear
lubrication
1)
X

Stihl FS 361 C-M Specifications

General

Brand	Stihl
Model	FS 361 C-M
Category	Trimmer
Language	English