FS 410 C K
English
33
Maintenance and Care
The following maintenance intervals apply in normal operating conditions. The spec-
ified intervals must be shortened accordingly when working for longer than normal
or under difficult cutting conditions (extensive dust, etc.).
before starting work
at the end of work and/or
daily
whenever tank is refilled
weekly
monthly
yearly
if faulty
if damaged
as required
Complete machine
visual inspection (safe condition, leaks) XX
clean X
replace any damaged parts X
Control handle Checking operation XX
Air filter, paper filter
visual inspection XX
replace
1)
X
Air filter, plastic fabric filter
visual inspection XX
clean X
replace XX
Fuel tank clean X
Fuel pickup body in fuel tank
check
2)
X
replace
2)
XXX
Carburetor
check idle adjustment, cutting attach-
ment must not turn
XX
set idle speed X
Spark plug
adjust electrode gap X
replace after every 100 hours of
operation
Intake port for cooling air
visual inspection X
clean X
Cylinder fins clean
2)
X
Spark arrestor in muffler
check
2)
X
clean or replace if necessary
2)
X
Spacer
check X
replace
2)
XX