Stihl FS 75 User Manual

35FS 75
English / USA
Engine
EPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category A = 300 hours, B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Ignition System
Fuel System
Rewind Starter
Weight
* see “Guide to Using this Manual”
Single cylinder two-stroke engine
Displacement: 1.55 cu.in
(25.4cm
3
)
Bore: 1.34 in (34 mm)
Stroke: 1.10 in (28 mm)
Power according to
ISO 8893: 1.3 bhp
(0.95 kW)
Max. speed of
output shaft (cutting
tool mounting) 7500 rpm
Idle speed: 2800 rpm
Specifications
Type: Electronic magneto ignition
Spark plug
(suppressed):
Bosch WSR 6 F or
NGK BPMR 7 A or
Champion RCJ 6Y
Electrode gap: 0.02 in (0.5 mm)
Spark plug
thread:
M 14 x 1.25;
0.37 in (9.5 mm)
lang
Carburetor: All position diaphragm
carburetor with integral fuel pump
Air filter: Foam and felt
elements
Fuel tank capacity: 0.93 US.pt
(0.44 L)
Fuel mix: See “Fuel”
Starter rope:
0.12 in (3.0 mm) diameter
Length
31.5 in (800 mm)*
33.5 in (850 mm)*
without cutting tool and
deflector 9.26 lb
(4.2 kg)

Stihl FS 75 Specifications

General

Brand	Stihl
Model	FS 75
Category	Brush Cutter
Language	English