Stihl FS 75 User Manual

15FS 75
English / USA
: For position of carrying eye see
"Parts and Controls"
: Place the clamp (1) with the
tapped hole on the left-hand side
of the drive tube.
: Squeeze the two ends of the clamp
together and hold in that position.
: Insert M 6 x 14 screw (2).
: Line up the carrying eye.
: Tighten down the screw firmly.
* see "Guide to Using this Manual"
: Slip the clamp (1) over the
deflector (2).
: Push deflector with clamp onto the
bearing housing (3) as far as stop.
: Tighten down the clamp.
Preparations
: Lay your trimmer on its back with
the shaft (2) facing up.
STIHL-“AutoCut 11-2“
: Take the thrust plate (1) off the
shaft (2).
STIHL-“PolyCut“
: Fit the thrust plate (1) on the shaft
(2) so that internal hexagon (3)
engages hexagon (4).
Fitting the Carrying Eye*
002BA142 KN
1
2
1
Mounting the Deflector
342BA045 KN
1
2
3
342BA002 KN
Mounting the Cutting Tools
342BA020 KN
1
2
3
4

Stihl FS 75 Specifications

General

Brand	Stihl
Model	FS 75
Category	Brush Cutter
Language	English