0458-662-0121-A
4
English
3 Overview
2 Battery compartment
The battery compartment holds the battery.
3Cover
The cover is the placeholder for a Smart Connector 2 A.
4 Air filter
The air filter filters the air entering the engine.
5 Control handle
The control handle is used for operating, holding and
controlling the brushcutter.
6 Trigger
The trigger switches the brushcutter on and off.
7 Trigger lockout
The trigger lockout unlocks the trigger.
8 Release slide
The release slide switches on the brushcutter and
selects the power level.
9LEDs
The LEDs indicate the selected power level.
10 Carrying ring
For attaching the carrying system to the brushcutter.
11 Loop handle
For holding and controlling the brushcutter.
12 Barrier bar
Maintains distance between operator’s leg and a metal
cutting attachment.
13 Shaft
The shaft connects all components.
14 Opening for stop pin
The opening for the stop pin accommodates the stop pin.
15 Stop pin
The stop pin blocks the shaft while a cutting attachment
is being mounted.
16 Gear housing
The gear housing encloses the gearbox.
17 Screw plug
The screw plug closes the filler opening for STIHL gear
grease.
18 LEDs
The LEDs indicate the state of charge of the battery and
any faults.
19 Button
The button activates the LEDs on the battery.
20 Battery
The battery supplies power to the brushcutter.
# Rating plate with machine number
3.2 Deflectors and Cutting Attachments
The illustrations show examples of deflectors and cutting
attachments. Approved combinations are listed in this
instruction manual, @ 21.
1 Universal Deflector
Protects user from flying debris and contact with the
cutting attachment.
2 Grass Cutting Blade
Cuts grass and weeds.
8
4
0000-GXX-3081-A0
1
2
7
4
5
3
6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
