0478 201 8312 B - EN
14
7.2 Assembling the machine
(GHE 135 L)
● Remove the shredder bag. (Ö 10.6)
● Position upper machine (A) on wheel
carrier (B) and carefully centre. Make
sure that rubber cover (1) is positioned
correctly – rubber cover (1) must not be
clamped between the upper machine
and the black cover on the wheel
carrier. Install upper machine (A) on
wheel carrier (B) by screwing in four
screws (D). Tighten screws (D) to 1-
1,5 Nm.
● Insert the shredder bag. (Ö 10.5)
7.3 Storing the Allen key
● Push Allen key (O) into holder (1) on
the machine.