0478 201 8312 B - EN
18
● Release the rotary switch. This returns
automatically to the I position. The
motor continues to run.
Reverse position
● Turn on/off switch (1) to the 0 position.
● Push locking slide (2) downwards.
● Turn on/off switch (1) to the left against
spring pressure as far as it will go to the
I position and hold. The motor runs.
10.8 Switching off the garden shredder
● Set on/off switch (1) to the 0 position.
The garden shredder motor is switched off
and braked automatically.
10.9 Recommencing operation
following a blockage
The garden shredder features an
automatic reverse. In the event of a
blocked blade roller, the machine
automatically engages reverse in order to
free the blockage.
The shredding material is released again.
10.10 Shredding
● Push the garden shredder onto firm and
level ground and set down safely.
● Put on thick gloves, safety glasses and
hearing protection.
● Connect the power cable to the garden
shredder. (Ö 10.2)
● Switch on the garden shredder.
(Ö 10.7)
● Wait until the garden shredder has
reached its maximum speed (idling
speed).
● Feed the garden shredder with
shredding material in the correct way.
(Ö 8.4)
● Switch off the garden shredder.
(Ö 10.8)
The blade roller runs in
reverse and releases the
shredding material again.
The rotary switch must be held in
this position, as otherwise it
automatically returns to the centre
position (0 position).
Risk of injury caused by ejected
shredding material. Keep your
hands and head away from the
feed opening. Do not look into the
machine!
Once the blockage has been
removed, only feed the garden
shredder at maximum motor speed.
To Next Page
Loading...
Need help?
General
