Stihl HL 75 K User Manual

17HL 75, HL 75 K
English / USA
Change the fuel pick up body every
year.
Before storing your machine for a long
period, drain and clean the fuel tank and
run engine until carburetor is dry.
The angle of the cutter bar can be
adjusted to 8 positions between 0°
(straight) and 90° (right angle).
This choice of angles helps enhance the
versatility of the unit.
To adjust cutter blade angle
: Shut off the engine.
: Pull back the sliding sleeve (1) and
use lever (2) to adjust joint by one or
several holes.
: Release the sliding sleeve and
allow pin to engage the quadrant
(3).
Sliding sleeve butts against the
housing when the pin is properly
engaged (after making adjustment).
389BA032 KN
Adjusting Cutter Bar Angle
(adjustable version only)
2
388BA012 KN
1
3

Stihl HL 75 K Specifications

General

Brand	Stihl
Model	HL 75 K
Category	Trimmer
Language	English