Stihl HLE 71 User Manual

238BA008 KN
1
2
► Insert the plug (1) into the extension cord cou‐
pling (2)
9.2 Strain relief clamp, strain relief
flap (supports extension cord
and reduces the likelihood of
disconnection of extension cord
receptacles and trimmer plug)
The strain relief (cable retainer) protects the con‐
necting cable from damage.
4
238BA009 KN
5
3
► make a loop (3) in the extension cord
► Pass the loop (3) through the opening (4)
► Slip the loop (3) over the hook (5) and pull it
tight
► Plug the extension cord into a properly instal‐
led outlet
10 Switching On
2
1
277BA029 KN
► make sure you have a firm and secure stance
► Hold your unit with both hands – right hand on
the control handle – left hand on the loop han‐
dle
► Stand upright – hold the unit in a relaxed posi‐
tion and always on right side of your body.
► The cutting attachment must not touch any
objects or the ground
► Press down the starting lockout lever (1) and
hold it in that position
► Squeeze the trigger switch (2) and hold it in
that position
11 Switching Off
► Release the trigger switch and starting lockout
lever.
WARNING
Note that the cutting attachment continues to run
for a short period after you let go of the throttle
trigger and starting lockout lever – flywheel
effect.
During longer work breaks – disconnect the plug
from the power supply.
When the machine is not in use, shut it off so
that it does not endanger others.
Secure it against unauthorized use.
12 Overload Cutout
The machine is equipped with an overload cut‐
out.
The overload cutout disconnects the power sup‐
ply in the event of mechanical overload, e. g.,
due to
–
Excessive feed effort
–
"Killing" of the motor speed
–
Pinching of the trimmer blades in the cut
English 10 Switching On
12 0458-277-0121-B

Stihl HLE 71 Specifications

General

Brand	Stihl
Model	HLE 71
Category	Trimmer
Language	English