HS 87 R, HS 87 T
English
22
Installing the spark plug
N Fit the spark plug by hand and
screw it in
N Tighten spark plug with combination
wrench
N Press the spark plug boot firmly
onto the spark plug
Use STIHL gear lubricant for hedge
trimmers (special accessory) to lubricate
the blade drive gear.
After about 25 hours of operation:
N Remove the screw plug (1) from the
gear housing on the underside of
the unit.
N Screw the tube of grease (2) into the
filler hole.
N Squeeze up to 1/4 oz (5 g) grease
into the gearbox.
NOTICE
Do not completely fill the gearbox with
grease.
N Remove the tube of grease (2).
N Refit the filler plug and tighten it
down firmly.
Lubricating the Gearbox