HS 87 R, HS 87 T
English
28
Ignition System
Electronic magneto ignition
Fuel System
All position diaphragm carburetor with
integral fuel pump
Weight
complete with cutting attachment, dry,
without blade scabbard
HS 87 T
HS 87 R
Cutting Blade
Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers
using genuine STIHL replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
For repairs of any component of this
unit’s air emissions control system,
please refer to the air emissions
systems warranty in this manual.
Observe all country-specific waste
disposal rules and regulations.
STIHL products must not be thrown in
the garbage can. Take the product,
accessories and packaging to an
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for
the latest information on waste disposal.
Spark plug (resistor
type):
NGK CMR6H,
BOSCH USR 4
AC
Electrode gap: 0.5 mm
(0.020 in)
Fuel tank capacity: 0.46 l (15.6 fl.oz)
750 mm (30") blade: 5.2 kg
(11.5 lbs)
1000 mm (40") blade: 5.5 kg
(12.1 lbs)
750 mm (30") blade: 5.5 kg
(12.1 lbs)
Sharpening angle to horizontal: 45°
Maintenance and Repairs Disposal
To Next Page
Loading...
Need help?
General
