Stihl HT 132 User Manual

HT 102, HT 103, HT 132, HT 133
English
38
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required
Complete machine
Visual inspection (condition, leaks) XX
Clean X
Control handle Check operation XX
Air filter
Clean XX
Replace
2)
X
Manual fuel pump (if fitted)
Check X
Have repaired by servicing dealer
1)
X
Pickup body (filter) in fuel tank
Have checked by servicing dealer
1)
X
Have replaced by servicing dealer
1)
XXX
Fuel tank Clean XX
Carburetor
Check idle adjustment – chain must not
rotate
XX
Adjust idle speed X
Spark plug
Readjust electrode gap X
Replace after every 100 operating hours
Cooling inlets
Visual inspection X
Clean X
Valve clearance
1)
If power is low or cranking effort very
high, have valve clearance checked
and, if necessary, adjusted by servicing
dealer
1)
X
Spark arresting screen in muffler
Check XX
Clean or replace XX
All accessible screws and nuts (not adjust-
ing screws)
Retighten X

Stihl HT 132 Specifications

General

Brand	Stihl
Model	HT 132
Category	Pole Saw
Language	English