0458-805-8621-A
38
English
23 Inspection and Maintenance
23.1 Inspection and Maintenance Chart
23.2 Inspecting and Maintaining the KombiMotor
WARNING
To reduce the risk of personal injury from unintended
activation, remove the connecting cord before inspecting the
power tool or carrying out any maintenance, @ 8. Carry out
only the maintenance operations described in this manual.
There are no user-authorized repairs. STIHL recommends
that repair work be performed by authorized STIHL servicing
dealers.
To properly maintain the KombiMotor:
► Have worn, missing or damaged safety labels replaced by
an authorized STIHL servicing dealer.
If you make a warranty claim for a component that has not
been serviced or maintained properly, coverage may be
denied.
23 Inspection and Maintenance
Always remove the connecting cord before carrying out any inspection, cleaning or maintenance.
The following maintenance intervals are examples and apply for normal operating conditions.
Actual use and your experience will determine the frequency of required inspection and
maintenance.
Before starting
work
After finishing work
or daily
Relevant Chapter
Complete Machine Visual inspection X
Clean X @ 22
Controls Check function and condition X @ 17.1
KombiTool Visual inspection XX
To Next Page
Loading...
Need help?
General
