Stihl ms 192t User Manual

33MS 192 T
English / USA
: Engage a suitable tool in the spark
plug boot (3).
: Pry off the spark plug boot.
: Unscrew and dry off the spark plug.
: Open the throttle wide.
: Pull the starter rope several times to
clear the combustion chamber.
: Refit the spark plug and connect the
spark plug boot, press it down
firmly – reassemble the other parts.
: Set the Master Control lever to
n,
the starting throttle position.
: Set the choke lever to j (warm
start) – even if engine is cold.
: Now start the engine.
During break-in period
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
Do not make the mixture leaner to
achieve an apparent increase in
power – this could damage the
engine – see “Adjusting the
Carburetor”.
Always disengage the chain brake
before opening the throttle. Running
the engine at higher revs with the
chain brake engaged (saw chain at
a standstill) will quickly damage the
engine and chain drive (clutch,
chain brake).
Operating Instructions

Stihl ms 192t Specifications

General

Brand	Stihl
Model	ms 192t
Category	Saw
Language	English