MS 201 C-M
English
35
Cranking
Standard Version
N Pull the starter grip slowly with your
right hand until you feel it engage –
and then give it a brisk strong pull
and push down the front handle at
the same time. Do not pull out the
starter rope to full length – it might
otherwise break. Do not let the
starter grip snap back. Guide it
slowly back into the housing so that
the starter rope can rewind properly.
Machines without additional manual fuel
pump: If the engine is new or after a long
out-of-service period, it may be
necessary to pull the starter rope several
times to prime the fuel system.
Version with Easy2Start
N Pull the starter grip slowly and
steadily with your right hand and
push down the front handle at the
same time. Do not pull out the
starter rope all the way – it might
otherwise break.
N Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
Starting the Saw
WARNING
Bystanders must be well clear of the
general work area of the saw.
Version with Easy2Start
N Press the manual fuel pump bulb at
least five times – even if the bulb is
already filled with fuel.
All models
N Push the hand guard (1) forward –
the chain is locked.
N Depress the throttle trigger
lockout (2) and throttle trigger (3)
and hold them in that position –
move the Master Control lever (4) in
the direction of start } as far as
stop and let go of the throttle trigger
and throttle trigger lockout at the
same time.
N Release the Master Control lever – it
then returns automatically to the
start position }.
N Hold and start your saw as
described.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
