Stihl RE 462 User Manual

RE 362, RE 362 PLUS, RE 462, RE 462 PLUS
English
50
Connection to the power supply socket
Before connection to the power supply,
check that the machine is switched off –
see "Switching off the machine"
N Swivel the lower holder upward and
remove the power cord
N Plug the power cord or extension
cord into a properly installed outlet
NOTICE
The machine may only be switched on
when the water intake hose is connected
and the water supply has been turned
on. Otherwise the machine may be
damaged due to lack of water.
N Turn on water supply
N Completely unroll the high-pressure
hose
N Turn the master switch to I – now
the machine is in standby mode
Machine with hose reel
NOTICE
Always completely unroll the high-
pressure hose from the hose reel. The
high water pressure causes the high-
pressure hose to expand. This can also
damage the hose reel or high-pressure
hose.
Actuate the spray gun
N Direct the spray attachment towards
the object to be cleaned
N Point the rotary nozzle downwards
when starting (if fitted)
N Press the safety latch (1) in the
direction of the arrow – the lever (2)
is unlatched
N Squeeze the lever (2)
The motor stops when the lever is
released.
Pressure/quantity control on the
machine
Working pressure and water flow rate
can be set on the high-pressure pump
for long-term adjustment in line with the
cleaning job concerned.
200 V / 3~:
up to 10 m 3.5 mm
2
10 m to 30 m 5.5 mm
2
9937BA012 KN
Switching On
1607BA011 KN
Working
1
671BA029 KN

Stihl RE 462 Specifications

General

Brand	Stihl
Model	RE 462
Category	Paint Sprayer
Language	English