EasyManuals Logo

Strong srt 24hx4003 User Manual

Strong srt 24hx4003
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Repeat Highlight the icon and press ENTER. You can select 3 different modes: None
to disable the function, 1 to repeat one track only and All to repeat the entire
list once it is finished.
Info Highlight the button and press ENTER to check the information of the shown photo.
Rotate Highlight the icon in the menu bar and press ENTER to rotate the picture 90
degrees clockwise or counter clockwise.
Zoom In/Zoom Out Highlight the icon on the menu bar and press ENTER to zoom in or zoom out
of the image.
Move View When the image is magnified, use this function for convenient check.
Highlight this icon, press ENTER, then press t up q to move the image.
NOTE: The move function
is only available when the image is enlarged.
7.0 TROUBLESHOOTING
Before calling a service technician, review following information for possible causes and solutions for the
problem you are experiencing. If the TV does not work properly after checking it, please contact your local
service line or STRONG dealer. Alternatively you can send a support mail via our website www.strong.tv.
Problem Possible cause and solution
No picture,no sound 1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make sure it is working or
turned on.
3. The power plug is in bad contact with the outlet
4. Check the signal source.
No colour 1. Change the colour system.
2. Adjust the saturation.
3. Try another channel. Black-white programme may be received.
The remote control
does not work
1. Change the batteries.
2. The batteries are not installed correctly.
3. Main power is not connected.
No picture, normal
sound
1. Adjust the brightness and contrast.
2. Broadcasting failure may happen.
Normal picture, no
sound
1. Press the volume up button to increase the volume.
2. The volume is set to mute, press
to restore the sound.
3. Change the sound system.
4. Broadcasting failure may happen.
Unorderly ripples on
the picture
It is usually caused by local interference, such as cars, daylight lamps and hair
driers. Adjust the antenna to minimize the interference.
17
English
English

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Strong srt 24hx4003 and is the answer not in the manual?

Strong srt 24hx4003 Specifications

General IconGeneral
BrandStrong
Modelsrt 24hx4003
CategoryTV
LanguageEnglish

Related product manuals