−
11
−
STOPPING
Set the speed control lever at the
low speed position and allow the
engine to run at low speed for 2 or
3 minutes before stopping.
SPEED CONTROL LEVER
2
Turn the key switch to the "STOP"
position.
ELECTRIC STARTER
3
Close the fuel valve.
FUEL VALVE
STOPPING ENGINE
WITH THE FUEL VALVE
Close the fuel valve while the
engine is running and wait until the
engine stops.
Set the key switch to the "STOP"
position after stopping the engine.
This procedure eliminates the fuel
from the carburetor.
Avoid allowing the fuel to remain in
the carburetor over long periods, or
the passages of the carburetor may
become clogged and malfunctions
may result.
1
To Next Page
Loading...
Need help?
General
