9. "HOW-TO" MAINTENANCE
−
17
−
INSPECTING THE SPARK
PLUG
■ Clean off carbon deposits on the
spark plug electrode using a plug
cleaner or wire brush.
■ Check electrode gap.
Adjust gap to :
0.7mm to 0.8mm (0.03 inches)
■ Use a proper spark plug :
BPR5ES (NGK)
ENGINE OIL CHANGE
■ Initial oil change
・・・・・After 20 hours of operation
■ Thereafter
・・・・・Every 50 hours of operation
1. When changing oil, stop the engine
and loosen the drain plug.
2. Re
-install the drain plug before refill-
ing oil.
3. Refer to the recommended oil table.
(See Section 3 Pre-operation Checks)
4. Always use the best grade and clean
oil. Contaminated oil, poor quality oil
and shortage of oil cause damage to
engine or shorten the engine life.
OIL CAPACITY : 1.55 liter
To Next Page
Loading...
Need help?
General
